Set-top box guide
MAG box IPTV works without any app or password: we register your box's MAC address, you type in one portal URL, and a 4K model gets one extra setting. About 7 minutes.
Step by step
You need a plan, the box on your network (a cable is best) and five minutes with the remote.
Read the MAC address
It's printed on the label under the box and shown under Settings > System settings > Device info (newer firmware: Settings > Device info). It starts with 00:1A:79.
Send the MAC address of the MAG box and your order number on WhatsApp. We link it to your plan and reply with your own portal URL.
Type the portal URL into the box
Restart and wait for the channel list
The box contacts the portal on start-up and pulls in the channel groups, the programme guide and the films and series menus.
On a 4K MAG, switch the output to 2160p
Settings > System settings > Video > Video output mode: pick a 2160p mode (or Auto), save and let the box reboot.
HD-only models stop at 1080p. The box or its spec sheet says 4K or UHD if yours can do more.
Formuler
The same portal method: the box's MAC address on our side, one URL on yours. For 4K, set the resolution in the box's display settings.
Start MYTVOnline
Every Formuler in the Z and S series ships with MYTVOnline. You'll find it on the home screen.
Find the box's MAC address
Look under Settings > Network or About, or on the label underneath. It follows the 00:1A:79:XX:XX:XX pattern.
Send the MAC address of the Formuler and your order number on WhatsApp. We link it to your plan and reply with your own portal URL.
Add the portal in MYTVOnline
MYTVOnline also takes an M3U link if you'd rather use one. Tell us which you want.
Restart and wait for the channel list
The box contacts the portal on start-up and pulls in the channel groups, the programme guide and the films and series menus.
Settings worth a minute
Run a network cable
A MAG is built for a wired connection, and many older models have no Wi-Fi at all. For 4K, the cable is the steadier choice anyway.
Match the output to the TV
On a 4K model, set Video output mode to a 2160p option in System settings > Video. Left on 1080p, a 4K film is scaled down before it reaches the TV.
Set the clock to UK time
A wrong time zone pushes the programme guide out of step. Choose the UK time zone so GMT and BST switch over on the right dates.
Install firmware updates
Old firmware can trip over a modern portal. The update option sits in the system settings.
FAQ
A portal is a web address the box calls every time it starts. Our side answers only boxes whose MAC address is registered to an active plan, so that address is the one piece of information we ask you for. Everything else comes down the portal by itself: channel groups, the programme guide, films and series. Nobody types a username or password with a set-top box remote, and when your plan is renewed the box just carries on.
That is what makes a MAG box a good fit for a parent or grandparent who wants the news, the football and a film on a Sunday without learning a new menu. The remote behaves like the set-top boxes most homes have had for years. STB Emu, an app for Android devices, copies this portal method if you'd like it on a stick.
Once the portal works, check the output on a 4K-capable MAG. Open System settings, then Video, choose a 2160p option under Video output mode and confirm; the box reboots and comes back in 4K. Use a high-speed HDMI cable and the TV socket marked for 4K at 60 Hz. The full list of what a 4K picture depends on, from the cable to the connection, is on 4K IPTV requirements.
For the portal we need your MAC address and a running plan. Plan lengths are compared on 4K IPTV prices, or start with the one-month trial. A stick for the bedroom TV is covered in the Firestick 4K guide, and every other device in the 4K set-up guides.
Error on the screen?
Photograph the message and send it with the model name from the label. We'll take it from there with you.
Ask us on WhatsApp